Superior Fireplaces DRL6500, Инструкция по установке и эксплуатации

Страница: 57 / 72

57
Operation
900077-00, 01/2018
Innovative Hearth Products
DRL6500 Linear Direct-Vent Gas Fireplaces
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Figure 48 - Remote Control Transmitter Display
Transmission
Thermostat
OFF/ON/SMART
Set Point
Temp./Level/State
Flame On
Fan Control
Child Safety Lock-Out
Low Battery Alarm
Room
Temperature
Maximum Level
Indicatiors
Light On
[1] When a mode icon is outlined, that function is currently active (ON)
[2] Optional accessory
Flame Control
The system has six flame levels (1–5 and MAX).
1. With the system ON, repeatedly press MODE until the flame icon displays ( Figure 43 ).
2. Press the UP/DOWN ARROW key to increase/decrease the flame height ( Figure 55 ).
Figure 49 - Flame Levels
Flame Level 5 Flame Level Maximum
NOTE: Pressing the UP ARROW key while the system is ON but the flame is OFF will cause the flame to turn
on in the highest (MAX) position. The wall switch receiver will beep each time the UP/DOWN ARROW key is
pressed, to confirm receipt of the command.
Turn ON Thermostat
1. Repeatedly press the THERMOSTAT key to cycle the thermostat between ON, OFF, and SMART modes ( Figure
48 ).
2. To change the temperature scale (°F to °C): With the system in the OFF position, press the THERMOSTAT and
MODE keys at the same time ( Figure 48 ).
Set Thermostat Temperature
1. Repeatedly press the THERMOSTAT key until ON displays next to the thermostat icon. The thermostat set
temperature displays in the mode setting area of the LCD screen ( Figure 48 ).
2. Press the UP/DOWN ARROW key until the desired temperature displays ( Figure 48 ).
Set SMART Thermostat Control
1. Repeatedly press the THERMOSTAT key until SMART displays next to the thermostat icon ( Figure 49 ).
2. The SMART thermostat function will automatically adjust the flame height (up or down) when the room
temperature varies from the thermostat set temperature by more than 5°.
Blower Control
Turning OFF the fireplace with the wall switch will NOT turn OFF the blower. To turn OFF these functions, use the
remote control before turning OFF the fireplace with the wall switch receiver.
1. Repeatedly press MODE until the blower icon displays ( Figure 48 ).
2. Press the UP/DOWN ARROW key to adjust the blower speed through six levels (1–5 and OFF) ( Figure 49 ).