Installation
900077-00, 01/2018
Innovative Hearth Products
DRL6500 Linear Direct-Vent Gas Fireplaces
40
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
3.
To light the burner, turn ON the wall or remote control switch. Ensure the igniter lights the pilot. The pilot flame
should engulf the flame rod (
Figure 34
).
Figure 34 - Electronic Pilot
Igniter
Flame
Rod
Pilot Hood
15.
Install the Glass Media
1.
See
Page 58
for instructions on
Installing the Glass Media
.
16.
Install the Baffle
1.
With the baffle oriented as shown in
Figure 35
, slide the rear tabs into the slots in the back panel.
Figure 35 - Baffle
Baffle
Back Panel
Clip
Firebox Ceiling
Tabs
2.
While sliding the tabs into the slots, slide the front lip of the baffle under the clips in the firebox ceiling.
17.
Install the Glass Door
1.
See
Page 59
for instructions on
Installing and removing the glass door
.
18.
Adjust the Air Shutter to Ensure Proper Flame Appearance
WARNING
• Air shutter adjustment should only be performed by a qualified professional service techni-
cian.
• Ensure glass door is in place and sealed during adjustment.
