12
www.
Supercircuits
.com
SECTION 3: SYSTEM SETUP
9.
Plug the
Louroe
power adapter
provided with the ASK-4KIT 101 into the
12 Vdc
jack on the back of the Louroe base
station.
Do not
plug the power adapter into an electrical outlet at this time.
10. Plug the speaker wire into the RCA male to 3.5 mm female
audio adapter
, and then plug the audio adapter into the
AUDIO
OUT VGA
port on the back of the recorder. See the photo above.
3.4 Mount and wire the AVSI switch
The AVSI switch is used to start and stop recorder.
1.
Carefully remove the cover screws of the AVSI switch with a 5/64” hex wrench, then set the cover aside.
Box
Screw
Screw
Cover
screws
2.
Remove the two screws securing the box to the backing plate (see above) using a Phillips screwdriver, then set it aside.
Knockouts
Knockouts
3.
Remove a knockout from the box or backing plate for cable routing (see above).
Содержание avsi-10
Страница 4: ...iv www Supercircuits com NOTES ...
Страница 56: ...52 www Supercircuits com NOTES ...