SUNWARD SWE155F, Руководство по эксплуатации и техническому обслуживанию

Страница: 79 / 188

OPERATION & MAINTENANCE MANUAL SWE155F
72
In this interface
：
1. There are four history failure record interfaces, the first interface is as figure 4-1, in which recoding
content and times of history failure.
2. F2 can be switched among history failures.
3. F3 can switch between interface4-1 and interface 4-3.
4. F4 can consult the detail time of failures, and switch to interface 4-2 from interface 4-1 or 4-3.
5. In interface 4-1 and interface 4-3, F5 can clear history failures.
6. In interface4-4, F5 is used to confirm clearing history failure.
7. F1 is to exit.
3.2.5.12 Throttle Calibration Interface
Disoperation can lead to abnormal system, so please try your best to contact with Sunward or the person who
is authorized by Sunward to deal with it.
In this interface
：
1. At first, enter into password inputting interface, press F4 to select the password digit capacity, F2 and
F3 are used to modify password. After inputting password, press F5, if password is correct, enter the
throttle calibration interface, press F1 to exit.
2. There is min. accelerator dial and max. accelerator dial in the accelerator calibration interface.
3. Adjust accelerator to min. position, press F2 to confirm.
4. Adjust accelerator to max. position, press F3 to confirm.
5. Press F1 to go back.