SUNWARD SWE155F страница 2 Скачать руководство пользователя

Страница: 2 / 188

OPERATION & MAINTENANCE MANUAL SWE155F

Foreword

It is particularly important that the operator should read these instructions carefully in order to

operate and maintain the excavator safely and correctly. Otherwise accidents or damage may

occur.

The manual supplies safety rules and labels which have been fixed on the machine so as to

provide the instructions of potential danger and the ways to avoid it.

SUNWARD cannot predict any kind of potential danger may occur in the process of operation

and maintenance. Therefore, the related instructions in this manual and on the machine only

concern the basic safety rules. It is the operator’s duty to take necessary measures to protect

safety if there is no corresponding method recommended in this manual.

The forbidden usages or operations that mentioned in this manual cannot be engaged in any

circumstances.

The excavator is designed according to the metric system, all the data presented are metric and

only metric parts and tools can be used.

The manual should be regarded as the permanent part of excavator and kept at the easy reading

place for consultation at any time. If it is damaged or lost, please contact SUNWARD or agents

for ordering. The manual should be attached when the excavator is transferred or sold.

Only trained, qualified and experienced operators can operate, check and maintain the machine.

The equipment covered by this manual meets the applicable technical specifications effective as

of its date of issue. The manufacturer SUNWARD reserves the right to make any modifications

from time to time without prior notices to any excavator components.

Please contact SUNWARD or agents for the updated information or the information problem

concerned in this manual.

Sunward Intelligent Equipment Co., Ltd.

Содержание SWE155F





























































































































































































Результаты поиска

Содержание SWE155F

Отзывы:

Похожие инструкции для SWE155F

Бренды по названию

Популярные бренды

SUNWARD SWE155F, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SWE155F

Отзывы:

Похожие инструкции для SWE155F

Бренды по названию

Популярные бренды