SUNWARD SWE155F Скачать руководство пользователя страница 21

Страница: 21 / 188

OPERATION & MAINTENANCE MANUAL SWE155F

1.2 GENERAL SAFETY RULES

1.2.1 Observing Safety Rules



Thoroughly read, understand and follow all

safety precautions and procedures found in this

manual.



Regularly affix, maintenance and renew new

safety labels, so that they are legible

，

conspicuous and affixed firmly.



In case safety labels and manual are damaged

or lost, contact us or our authorized distributor

to order new ones (when ordering, please

specify machine model, and serial NO).



Learn about how to properly and safely operate

machine and its controlling device.



Use only trained and qualified person to

operate on this machine.



Keep machine at good working condition.



Unapproved modification on this machine can

impair function, effect service life and

jeopardize personal safety.



Note: all safety information described in this

section covers only basic safety information of

this machine. It’s not possible to predict every

circumstance which might involves potential

hazards. So it’s necessary to ask for instruction

from your superior before attempting any

operation or maintenance procedure.

Содержание SWE155F





























































































































































































Результаты поиска

Содержание SWE155F

Отзывы:

Бренды по названию

Популярные бренды

SUNWARD SWE155F, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SWE155F

Отзывы:

Бренды по названию

Популярные бренды