SUNWARD SWE155F, Руководство по эксплуатации и техническому обслуживанию

Страница: 53 / 188

OPERATION & MAINTENANCE MANUAL SWE155F
46

Set work equipment to the sprocket side. Extend arm
cylinder and bucket cylinder to their end of stroke,
operate boom cylinder and lower the work equipment
to the ground.

Stop the engine, remove the key and lock cab doors
and windows securely.

Use steel rope and support rod with sufficient length
to keep them not to hit machine during lifting
operation. Cover steel rope or rod with protective
material to avoid damages to machine if necessary.

Put steel ropes through the place between the first and
second track rollers on both side of the machine.

Adjust steel rope to keep the lifting angle within 30°
to 40°.
 Lifting the machine gradually, check that it’s balanced.
Make sure to keep machine at level, otherwise
re-adjust steel rope until it’s at level.
2.2 STORAGE
Note

To protect the hydraulic cylinder piston rod
while in storage, keep the work equipment in
the fig shown at right. (This prevents rust from
developing on the piston rod).
2.2.1 Before Storage

Clean and wash all surface and exposed parts.

Apply grease to all lubricating parts until fresh grease
spills out.

Change engine oil.

Apply grease to exposed parts on piston rod.

Top up fuel tank with diesel oil.

Disconnect battery negative terminal and secure
battery cover. You can also remove the battery from
the machine, store it separately.

If the expected ambient temperature may below 0°C