SUNWARD SWE155F Скачать руководство пользователя

Страница: 45 / 188

OPERATION & MAINTENANCE MANUAL SWE155F

1.4.12 Safety Operation for High-pressure Hoses



If oil or fuel leaks from high-pressure hoses, it may cause fire or defective operation, which may lead to

serious injury. If any loose bolts are found, stop work and tighten to the specified torque. If any damaged

hoses are found, stop operations immediately and contact your SUNWARD distributor.



Damaged hose, deformed mouthpiece, damaged O-ring.



Frayed or cut covering or exposed reinforcement wire layer.



Covering swollen in places.



Twisted or crushed movable portion of hose.



Foreign material embedded in covering.

1.4.13 Accumulator

Accumulator is charged with pressurized nitrogen. When

handling accumulator, careless operation may lead to

explosion and cause serious injury or damage. Always

follow the following instructions.



Do not disassemble accumulator.



Do not keep accumulator close to fire or expose it

under flame.



Do not drill holes, weld or heat up on accumulator.



Do not hit or roll accumulator to avoid any shock on

it.



When handling accumulator, bleed the air.



Please contact SUNWARD dealer to get assistance

with this work.

Содержание SWE155F





























































































































































































Результаты поиска

Содержание SWE155F

Отзывы:

Похожие инструкции для SWE155F

Бренды по названию

Популярные бренды

SUNWARD SWE155F, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SWE155F

Отзывы:

Похожие инструкции для SWE155F

Бренды по названию

Популярные бренды