SunStar SPS/E-5050 Series, Руководство пользователя

Страница: 19 / 79

17
Function No. : 025 Function Name : Signal mode of pedal 2
It is to set how to treat the signal of pedal 2(Pedal for sewing start).
Sewing operation starts when you step on a pedal once and take off your foot from the
pedal. (Factory installed condition)
[ Contents ] If you step on the pedal 2(pedal for sewing start) once, the signal is
treated as effective one even though you take off foot from the pedal,
and the sewing operation will be started.
[ Ref. ] As above LATCH means a signal system that if once a signal comes(when
you step on a pedal), the signal is treated as an effective one though the
signal is cancelled(even when you take off foot from the pedal).
025. Pedal 2 Mode
1) LATCH
Setting
Value
The sewing operation performs just when you step on a pedal.
[ Contents ] The sewing operation performs just when you step on the pedal 2(pedal
for sewing start), but if you take off foot from the pedal 2, the sewing
operation will be stopped.
[ Ref. ] As above, FLIP means a signal system that the signal is treated as an
effective one just when the signal is coming(just when you step on a pedal).
2) FLIP
Function No. : 026 Function Name : Setup for presser foot operation
It is to set the operation condition of presser foot.
It is to maintain the presser foot down all the time.
[ Contents ] The machine maintains the presser foot down all the time even not in
use.
026. PF Operation
1) ALWAYS_DN
Setting
Value
The presser foot is up except during sewing operation. (Factory installed condition)
[ Contents ] The machine goes down the presser foot just when the sewing operation
performs. When the sewing operation stops or finishes, the presser foot
goes up.
[ Ref. ] If you press 5 key, the presser foot goes down to make thread inserted.
2) SEW_DN
The machine goes down the presser foot in the progress or reverse of one stitch as well as
in the sewing operation.
[ Contents ] The presser foot goes down not only in the progress and reverse of one
stitch but during the sewing operation.
3) TRIAL_DN