SunStar SPS/E-5050 Series, Руководство пользователя

Страница: 35 / 79

33
Function No. : 064 Function Name : Number of chain sewings
Function No. : 065 Function Name : Transferring chain numbers
It is to set the sewing mode and number of patterns to chain sew.
It is to set the number of patterns to chain sew. (Factory installed condition : 0)
[Contents] When the number is set as “0”, one pattern is repeated and the screen
indicates “NOR_SEW”. When set as other than “0”, it is set for chain
sewing. This function is used to sew several patterns in certain amount of
numbers. The mode is indicated as “CHN_XX”on the screen.
064. Chain Number
0~16
Setting
Value
Number set as 2
Number set as 3
⇨ ⇨ ⇨ ⇨
⇨ ⇨ ⇨ ⇨
It is to set the mode of stopping one pattern and transferring to the next pattern.
The pattern is read and transferred manually.
[Contents] While chain sewing, the machine stops when the pattern is stopped. Press the
ENTER key to read and sew the next pattern.
065. Chain Select
1) MANUAL
Setting
Value
The next pattern is read and transferred automatically.(Factory Installed Condition)
[Contents] When a pattern is stopped during chain sewing, the machine stops and the
next pattern is automatically read. Sewing can be started by controlling the
foot plate switch.
2) AUTO
The next pattern is read and transferred by an external signal.
[Contents] After the machine stops when a pattern is stopped during chain sewing, there
must be a signal from outside to read the next pattern.
3) EXTERNAL