65
088
Setting the Safety Mode
1) DISABLE
NO.
Function name
Contents
Explanation and factory-installed setting value
Unit
2) ENABLE
Not used (at the factory)
Used
1
50[1*50mm]
(For 5050)
Y-axis forward direction sewing limit
set-up
081
Sets the size of Y-axis forward direction as desired
(1~250)
1
1°
-50[1*50mm]
(For 5050)
1) DISABLE
2) ENABLE
Y-axis reverse direction sewing limit
set-up
Quick origin search motion for
1811(not applied)
082
083
Sets the size of Y-axis backward direction as
desired (-1~-250)
Quick origin search motion not used
Quick origin search motion used
Reverse Rotation after Trimming
Setting Function
Reverse Rotation Angle after Trimming
Setting Function
Designate the place of saving pattern
designs
084
085
086
1) DISABLE
2) ENABLE
15°
1) SAVE USB
2) SAVE FLASH
Do not set function of reverse rotation after trimming
Do set function of reverse rotation after trimming
Reverse Rotation Angle after Trimming Setting
(1~40 °)
Enabled (default)
Disabled
087
Deleting Flash Memory Designs When
New Designs Are Opened
Enabled (default)
Disabled
089
090
Jump Speed Setting
Emergency Stop Switch Use Setting
for Jump Motion
1) SLOW_SPEED
2) MIDDLE_SPEED
3) FAST_SPEED
1) DISABLE
2) ENABLE
Lowest Jump Speed
Medium Jump Speed
Highest Jump Speed
Emergency stop switch disabled during jump motion.
Emergency stop switch enabled during jump motion
091
Presser Foot Lift Setting During Jump
Motion
1) DISABLE
2) ENABLE
The presser foot lift function during jump motion is disabled.
The presser foot lift function during jump motion is enabled.
092
Presser Foot's Fabric Thickness
Control Code Setting
1) DISABLE
2) ENABLE
The presser foot's fabric thickness control code is not used.
The presser foot's fabric thickness control code is used.
1) SAVE
2) DELETE
093
Clamp move enable/disable (limited
to the clamp motor-equipped models)
1) DISABLE
Not used.
Cannot be used in E-Series 5050.
097
Presser foot height setting
User sets the presser foot height.
Cannot be used in E-Series 5050.
101
Design call sensor time setting
10
Set the time of the design auto call sensor
(SEN_0~SEN_7).
094
Primary use of user-defined clamp
move enable/disable (limited to the
clamp motor-equipped models)
1) DISABLE
Not used.
Cannot be used in E-Series 5050.
095
PF height control enable/disable (limited to
the presser foot motor-equipped models)
1) DISABLE
Set the vertical movement of the presser
foot from the lowest position.
096
Clamp Height Setting
000
User sets the clamp height (000~300).
Cannot be used in E-Series 5050.
1[0.05ms]
1[100ms]
0.05[ms]
100
External control signal setting
1) DISABLE
2) ENABLE
Not used
Use the external signals.
102
Design auto call group setting
1) 001~255
2) 301~555
3) 601~855
Use #001~255 designs.
Use #301~555 designs.
Use #601~855 designs.
098
Design auto call
1) DISABLE
2) ENABLE
3) BARCODE
4) SAUT_BCODE
5) AUTO_BCODE
Auto call function not used
Auto call function used
Barcode-based auto call function setting
Possible to move to the barcode origin point after work is done
Auto style setting based on barcode
6) SFAT_BCODE
Auto start and move to barcode origin point after work
is done
099
Sewing ready setting upon design
auto call
1) DISABLE
2) ENABLE
3) AUTO_READY
4) AUTO_BCORG
Sewing ready not set
Sewing ready set
Previous design call when power is on
After power-on, automatic move to the barcode origin point
Содержание SPS/E-5050 Series
Страница 2: ......
