SunStar SPS/E-5050 Series Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 79

background image

45

Function Name: Clamp Move Enable/Disable

(limited to the clamp motor-equipped models)

It

User sets the clamp move.

Disabled (default value)

[Contents]

Large patterns (SPS/E-5050, 8050) does not have the motor enabling delicate clamp

adjustment. Therefore this function cannot be used, and it is set at disabled all the time.

093. Clamp En/Dis

1) DISABLE

Setting

Value

Function Name: Primary Use of User-Defined Clamp Move Enable/Disable

(limited to the clamp motor-equipped models)

User-defined clamp move saved in a design can be set primarily.

The user-defined setting of clamp move saved in a design is not primarily used.

[Contents] When the user-defined value is not primarily used, the value set at 093. Clamp

En/Dis or 096. Clamp Range will prevail.

[Contents]

Large patterns (SPS/E-5050, 8050) does not have the motor enabling delicate clamp
adjustment. Therefore, this function cannot be used, and it is set at disabled all the
time.

094. Clamp Data

1) DISABLE

Setting

Value

Function Name: PF Height Control Enable/Disable

(limited to the presser foot motor-equipped models)

User enables or disables the function of controlling presser foot height.

User can set the range of the vertical movement of the presser foot from the lowest position (default
value).

[Contents] Disable is a default value. Since the presser foot's base position is at the

lowest position, the presser foot can accommodate all designs including regular
designs and designs with height difference. However, the presser foot cannot
move lower than the initially set position.

[Contents]

Large patterns (SPS/E-5050, 8050) does not have the motor enabling delicate clamp
adjustment. Therefore, this function cannot be used.

095. PF En/Dis

1) DISABLE

Setting

Value

Function No. : 093

Function No. : 094

Function No. : 095

«
...
45
46
47
48
49
...
»

Содержание SPS/E-5050 Series
















































































Отзывы:

Нет отзывов

Похожие инструкции для SPS/E-5050 Series

Бренд: Happy Страницы: 9

Бренд: Republic Bank Страницы: 18

Lumina 20 M26036TD

Бренд: Minuteman Страницы: 26

GPS/F-1006 Series

Бренд: Garudan Страницы: 114

Бренд: ELNA Страницы: 2

Бренд: Singer Страницы: 68

Бренд: Consew Страницы: 26

TRIDENT T26 SC PLUS

Бренд: Hillyard Страницы: 28

Бренд: Contec Страницы: 13

Бренд: Furuno Страницы: 21

Бренд: Pfaff Страницы: 90

Бренд: Singer Страницы: 18

Бренд: Nilfisk-Advance Страницы: 39

LK-1900S Series

Бренд: JUKI Страницы: 92

LBH-1790A Series

Бренд: JUKI Страницы: 79

Бренд: JUKI Страницы: 56

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды