Mystic Tan Kyss™
Owner’s Manual
24
The user to receive the tan only needs to stand in the booth with their feet on the metal, foot-
shaped pads and wave their hand in front of the start sensor. The dielectric effects of the spray
will work even if the user is wearing foot pads or cloth protectors.
Once the session starts, simply follow the voice prompts for a flawless tan. There are only two
positions during the session: front spray and rear spray. There is a short dry cycle following the
front spray before the rear begins and a dry cycle after the final spray. During the session, excess
spray will be extracted from the upper exhaust fan in the ceiling opposite the nozzle.
Rinse Down
Once the session is complete, every salon attendant likes a booth that can go ahead and clean
itself. Once the dry time finishes and the user exits the booth, the rinse down cycle will begin.
The rinse down will begin automatically, unless the door is not closed. In the event the door
remains open after the user steps out, the booth will play an audio track instructing the door to be
shut before the rinse will begin.
Maintaining for Optimum Performance
Every machine and complex piece of equipment requires maintenance to perform properly. Just
like your car needs an oil change to keep the engine running smoothly, the Mystic Kyss is a
complex piece of equipment with a multitude of different systems working together, and proper
maintenance is a vitally important asset in keeping your investment running and looking like
new.
As the
session runs,
the reservoir
indicator
will reflect
the actual
volume in
the reservoir.
The screen
will display
the name of
solution
from the
cartridge.
*IMPORTANT NOTE: Since the booth waits for the user to ENTER and EXIT before the rinse cycle
begins, the DOOR to the booth must OPEN and CLOSE before the rinse begins. This feature ensures
that a user is not still inside the booth when the rinse begins.
Remember this during test sessions
. *
