Mystic Tan Kyss™
Owner’s Manual
27
Clean the Drain Filter
Clean the drain filter and sump basin to remove excess sediment and ensure no
obstructions form. The drain filter cover will simply snap off, providing access to the
filter and sump basin. Regularly neglecting the drain filter can lead to clogging of the
sump and failure to drain properly.
The cover will snap off easily (do not apply excessive force). Remove
the filter and wash in sink to dispel any sediment that may have
accumulated from bodies or surfaces. You may need a soft bristled
brush to brush away lint or sediments from the filter. Clean the sump
basin of any sediment, then replace the filter and slide the cover back
into place. Now, move to the touchscreen.
After hand washing the drain filter,
go to
the touchscreen and select Staff > Tools and
start a manual Rinse. Make sure both doors
are closed. This rinse will run for 20 seconds.
After running the manual Rinse,
in the
touchscreen go to Staff > Tools and select
the Drain activation to clear any remaining
water from the sump. This will drain for 20
seconds, but you can use again if water
remains in the drain.
