Sungrow SG110CX-P2 Скачать руководство пользователя

Страница: 4 / 126

About This Manual

The manual mainly contains the product information, as well as guidelines for installation,

operation, and maintenance. The manual does not include complete information about the

photovoltaic (PV) system. Readers can get additional information at

www. sungrowpower.

com

or on the webpage of the respective component manufacturer.

Validity

This manual is valid for the following model of low-power grid-connected PV string inverters:

•

SG125CX-P2

•

SG110CX-P2

It will be referred to as "inverter" hereinafter unless otherwise specified.

Target Group

This manual is intended for professional technicians who are responsible for installation, op-

eration, and maintenance of inverters, and users who need to check inverter parameters.

The inverter must only be installed by professional technicians. The professional technician

is required to meet the following requirements:

•

Know electronic, electrical wiring and mechanical expertise, and be familiar with electri-
cal and mechanical schematics.

•

Have received professional training related to the installation and commissioning of elec-
trical equipment.

•

Be able to quickly respond to hazards or emergencies that occur during installation and
commissioning.

•

Be familiar with local standards and relevant safety regulations of electrical systems.

•

Read this manual thoroughly and understand the safety instructions related to
operations.

How to Use This Manual

Please read this manual carefully before using the product and keep it properly at a place

for easy access.

All contents, pictures, marks, and symbols in this manual are owned by SUNGROW. No part

of this document may be reprinted by the non-internal staff of SUNGROW without written

authorization.

Contents of this manual may be periodically updated or revised, and the actual product pur-

chased shall prevail. Users can obtain the latest manual from

support.sungrowpower.com

or sales channels.

Symbols

This manual contains important safety instructions, which are highlighted with the following

symbols, to ensure personal and property safety during usage, or to help optimize the prod-

uct performance in an efficient way.

Содержание SG110CX-P2































































































































Результаты поиска

Содержание SG110CX-P2

Отзывы:

Похожие инструкции для SG110CX-P2

Бренды по названию

Популярные бренды

Sungrow SG110CX-P2, Руководство пользователя

Результаты поиска

Содержание SG110CX-P2

Отзывы:

Похожие инструкции для SG110CX-P2

Бренды по названию

Популярные бренды