Sungrow SG110CX-P2, Руководство пользователя

Страница: 32 / 126

22
4.4 Moving the Inverter
Before installation, remove the inverter from the packing case and move it to the installation
site.
It is recommended to use the four screw-in handles and the Bottom handles to move the in-
verter. Attach the four screw-in handles to the inverter lugs and base. Lift and move the in-
verter to its destination by means of the bottom handles and the four installed handles.
Improper handling may cause personal injury!
• Arrange an appropriate number of personnel to carry the inverter according to
its weight, and installation personnel should wear protective equipment such
as anti-impact shoes and gloves.
• Attention must be paid to the center of gravity of the inverter to avoid tilting dur-
ing handling.
• Placing the inverter directly on a hard ground may cause damage to its metal
enclosure. Protective materials such as sponge pad or foam cushion should be
placed underneath the inverter.
• Move the inverter by holding the handles on it. Do not move the inverter by
holding the terminals.
4.5 Installing the mounting-bracket
Inverter is installed on the wall and bracket by means of mounting bracket.
The expansion plug set shown below is recommended for the installation.
4 Mechanical Mounting User Manual