User Manual
10 Operation of LCD Display Panel
73
Parameter
Explanation
Default
Range
Upper
Power*
Output power of point P2 in the Q(P)
mode curve (in %)
100% 50%...100%
*Lower Power <Upper Power
Fig. 10-3
Reactive
Power Regulation Curve in Q(P) Mode
“
Q(U)
” Mode(when the country selection is not “IT”)
The reactive power ratio changes with the grid voltage.
If the country selection is not “IT” (Italy), after selecting
Q(U) mode,
Press
j
to enter the Run-param-Q(U)
sub-menu.
For each item setting,
Press
h
to move cursor right and
Press
j
to set the appropriate value.
Confirm settings by Pressing
ENTER
.
Tab. 10-6
“Q(P)” Mode Parameters Explanation
Parameter
Explanation
Default
Range
Lower Q/Sn
Ind
Inductive Q/Sn value of point P4 in the
Q(U) mode curve
25% 0%...50%
Upper Q/Sn
Cap
Capacitive Q/Sn value of point P1 in the
Q(U) mode curve
25% 0%...50%
Lower U Limit
Grid voltage limit
(in %)
of point P1 in the
Q(U) mode curve
80% 80%...90%
Upper U Limit
Grid voltage limit
(in %)
of point P4 in the
Q(U) mode curve
115% 110%...115%