User Manual
1 Safety Instructions
3
Lethal voltage exists!
PV arrays will produce electrical energy when exposed to sunlight and thus
can create an electrical shock hazard.
y
Wiring of the PV arrays should only be performed by qualified personnel.
All cables must be firmly attached, undamaged, properly insulated and
adequately dimensioned.
During Inverter Operation
Do not open the enclosure when the inverter is under voltage. There is a highly
unlikely risk of explosion in very specific cases of malfunction. The housing will
protect persons and property from such an explosion, only if it is correctly sealed.
There is a risk of inverter damage or personal injury!
Do not disconnect DC connectors while the inverter is under AC load! First
de-energize the equipment from dual power sources and then verify that
there is no voltage present.
There is a risk of burn!
Prevent from touching device hot parts (such as heat sink) during
operation. Only LCD display panel and DC switch can be touched during
inverter operation.
