User Manual
7 Commissioning
49
Step 3
Language selection screen will prompt. Perform
language settings with the right two buttons.
Detailed button functions can be referred to “10.1
Description of Button Function”.
Press
j
to
choose language as you prefer. Confirm the
settings by
Pressing
ENTER
.
Step 4
Configure time according to the local time. Time
setting is very important, which directly affects
data logging.
Press
h
to move cursor and
Press
j
to scroll up time value. Confirm the settings by
Pressing
ENTER
.
Step 5
Select the country code according to the
inverter’s installation country. Each country code
represents corresponding local protective
parameters that have been preset before delivery.
Before country setting, there is warning screen.
Step 6
Press
j
to choose country code. Confirm the
settings by
Pressing
ENTER
.
Refer to “10.11 Protective Parameters Setting” for
country code explanation. If the inverter is installed
where the country code is not included, please choose
item “Other” and manually set the protective
parameters.
If the country code is not set correctly during commissioning, reset the
protective parameters as dictated in “10.11 Protective Parameters Setting”.
There may be faults if otherwise.
Step 7
Configure grid code on the display.
Press
j
to
select grid code. Confirm the selection by
Pressing
ENTER
. Where, LV indicates Low
Voltage Grid Code; MV indicates Middle Voltage
Grid Code.
When choose MV,
Press
h
to enter the LVRT function
selection,
Press
j
to switch on or off the LVRT function
and
Press
ENTER
to confirm the selection.
