37
P
Pa
arra
am
me
ette
err
R
Ra
an
ng
ge
e
Total discharge
compensation
-3276.7~3276.7 kWh
Total charge
compensation
-3276.7~3276.7 kWh
Local/Remote Control
Remote, Local, Remote/Local
Apparent power
derating
50.0~110.0 Pn%
Active power derating
50.0~110.0 Pn%
Grid rated frequency
50HZ/60HZ
Weak grid mode
Enable/Disable
Modulation filtering
Enable/Disable
Fast dispatch
Enable/Disable
Parallel control
Enable/Disable
Parallel role
Slave device/ Master device
Paralle address
0~16
DC switch type
Single main switch/Double main switches
6.7.6 Timed Charge and Discharge
Before entering the [Timed Charge and Discharge] interface, enable the switch [Timed
Charge and Discharge] on the operation parameters interface.
6.7.6.1 Enter
Step 1
Click [Device Monitoring] to enter the corresponding interface.
Step 2
Click the button [
] in the left device list bar, select the desired device type from the
drop-down list, and select corresponding device.
Step 3
Click [Timed Charge and Discharge] to set Start Time, End Time, and Power of the timer.
-- -- E
En
nd
d
6.7.6.2 Setting steps
Step 1
Select a device, and click [Add] to add a time and power setting field.
Step 2
Set the start time and end time, where the start time is earlier than the end time.
Step 3
Set power, where it can be set to a value ranging from -110 to 110.
Operation Manual
