Sungrow SC1200UD-US, Руководство по эксплуатации

Страница: 42 / 70

36
P Pa arra am me ette err
R Ra an ng ge e
Threshold for leakage current protection 1.00~10.00 A
Zero-power mode Enable/Disable
Active islanding Enable/Disable
Threshold for grid voltage unbalance
protection
3.0~20.0 %
Delay for grid voltage unbalance protection 0.1~600.0 s
Manual start after fault Enable/Disable
Insulation monitoring alarm threshold 15~1000 KΩ
Insulation monitoring protection threshold
15~100 KΩ
Delay for insulation monitoring measuring 30s, 60s, 150s, 180s
Insulation monitoring activation Enable/Disable
Insulation monitoring switching interval 15min, 30min
DC undervoltage setpoint SC1200UD-US:680.0-1550.0 V
SC1375UD-US: 780.0-1550.0 V
SC1575UD-US:895.0-1550.0 V
SC1725UD-US: 980.0-1550.0 V
DC overvoltage setpoint SC1200UD-US:680.0-1550.0 V
SC1375UD-US: 780.0-1550.0 V
SC1575UD-US:895.0-1550.0 V
SC1725UD-US: 980.0-1550.0 V
Threshold for DC overcurrent protection 193~2288 A
Delay for DC overcurrent tripping 40~600000 ms
10-min overvoltage protection value 100.0~150.0 %
6.7.5 System Parameters
Step 1 Click [Device Monitoring] to enter the corresponding interface.
Step 2 Click the button [ ] in the left device list bar, select the desired device type from the
drop-down list, and select corresponding device.
Step 3 Click [System Parameters] to view the system parameters of the device.
-- -- E En nd d
For specific setting method, refer to
"
6.7.2 Node Status
"
.
6 Web Operation Operation Manual