Sungrow SC1200UD-US, Руководство по эксплуатации

Страница: 32 / 70

26
6.5 Operation Procedure
Perform the following operations when logging into the Web for the first time.
Step 1 Complete electrical connections and successfully log into the Web.
Step 2 Configure serial ports of the Logger.
After logging into the Web, first configure the serial ports, to ensure that the Logger can
normally communicate with downstream devices. Refer to the chapter
"
6.10.5 Port
Parameter
"
.
Step 3 Synchronize the system time.
Check whether the system time is correct, and perform manual time synchronization or
automatic time synchronization when necessary. Refer to the chapter
"
6.10.2 System
Time
"
.
Step 4 Automatically search the device.
Devices that can be automatically searched, such as SUNGROW string inverter, can be
added via the auto search function with addresses allocated automatically. Refer to the
chapter
"
6.8.1 Device List
"
.
Step 5 Add device. Refer to the chapter
"
6.8.1 Device List
"
.
Step 6 Configure forwarding service.
After all devices have been added, configure the forwarding service of the Logger, to
ensure that the Logger can forward the data to upstream devices. Refer to
"
6.10.3
Transfer Configuration
"
.
-- -- E En nd d
6 Web Operation Operation Manual