Sungrow SC1200UD-US Скачать руководство пользователя страница 11

Страница: 11 / 70

•

Installation described in this section must be strictly observed. Any other or
additional installation other than the described installation is not permitted.

•

Installation and connections other than the contents described in this section
may lead to device damages and void warranty claims from Sungrow.

2.2

Important Safety Instructions

This section introduces the safety instructions during installing or commissioning of the

PCS. Read the safety instructions in this section before installation. Please also respect

all warnings, instructions, and cautions in respective chapters before installation and

commissioning.

Shock Hazard!

Death resulting from burns and electric shock upon touching the PCS live

components.

•

Do not touch the terminals or conductors connected to the grid.

•

Observe all safety regulations regarding the grid connection.

Shock hazard inside the product!

•

Note and respect the warning labels in the product.

•

Respect all safety instructions in this manual and other related documents.

Electric shock or fire due to device damage or system fault!

•

Visual check if there is device damage or other potential dangers before
operation.

•

Check if other external devices or circuit connections are safe.

•

Operate the device only when it is safe to do so.

Operation Manual

2 Safety Instructions

Содержание SC1200UD-US







































































Результаты поиска

Содержание SC1200UD-US

Отзывы:

Похожие инструкции для SC1200UD-US

Бренды по названию

Популярные бренды

Sungrow SC1200UD-US, Руководство по эксплуатации

Результаты поиска

Содержание SC1200UD-US

Отзывы:

Похожие инструкции для SC1200UD-US

Бренды по названию

Популярные бренды