Sun Microsystems SunSwift SPARCserver 1000, Руководство по обслуживанию

Страница: 56 / 218

2-10 SPARCserver 1000 System Service Manual—June 1996
2
Figure 2-3 Key Switch
2.7 Running OBP and POST
1. To reach and activate the reset switch:
a. Remove the key from the key switch.
b. Remove the front panel. Lift up on the latch at the bottom of the panel.
The top of the front panel rests in a grooved channel on the system top
front edge. Once unlatched, the front panel lifts off. See Figure 2-4.
c. Insert the back of a pencil or other narrow object into the small
opening in the center of the metal face plate and press the reset button.
See Figure 2-5.
2. After the system has been reset, replace the front plastic panel.
Rest the top of the front panel in the grooved channel on the top panel. Push
in on the lower portion of the front panel until it snaps back into place.
3. Return the key to the key switch.
Standby
On
Diagnostics
Locked