Sun Microsystems SunSwift SPARCserver 1000, Руководство по обслуживанию

Страница: 140 / 218

10-10 SPARCserver 1000 System Service Manual—June 1996
10
4. Hold the module by the edges near the connector and firmly but gently
press the module down until the connector is fully seated.
Caution – Do not rock the module onto the socket; the plastic connector
housing may break.
5. Starting from the side opposite the connector, press each corner of the
module to ensure that it rests on the collar of the standoff.
6. Press down on the tip insert of each standoff to lock the module in place.
10.4 SBus Cards
The system board has three SBus card locations. See Figure 10-6. To select the
card location, see Appendix E, “General Rules for System Configuration.”
Caution – Use the Sun ESD kit provided when performing these procedures.
Figure 10-6 SBus Card Locations
!
!
SBus cards
SBus connectors