Sun Microsystems StorageTek T10000, Руководство оператора

Страница: 55 / 120

96174 • Revision EA 53
C H A P T E R
4
Menu System
This chapter provides information and guidelines for using the T10000 menu system by
using the virtual operator panel (VOP) application or the physical operator panel of a
rack mount drive. VOP provides a graphical user interface (GUI) representation of the
drive menu system.
Note – See the Virtual Operator’s Panel Operator’s Guide for information regarding VOP,
and guidelines for operation.
Menu System Overview
The T10000 tape drive menu system provides the operator and service representative a
means to determine drive configuration settings, and access drive utilities. On library-
attached drives, the virtual operator panel (VOP) application is the primary means of
connection through the drive’s Ethernet maintenance port. The rack mount drive
chassis has a physical operator panel on the front panel (see
FIGURE 2-2 on page 34
).
Therefore, you can access the menu system directly, as an alternative to using VOP.
Note – Service representatives can also use the PC-based StorageTek Diagnostic System
(STDS) application to navigate through the T10000 tape drive menu system. Use
version 1.55 (or higher) with a T1000A or version 1.57 (or higher) with a T10000B drive.
The following sections describe the menu system, and provide guidelines for the menu
system, as seen through the physical operator panel, and the STDS.
Note –
Although the VOP GUI representation is visually very different from the
operator panel view, the information is still very informative when using VOP.
The menu system information is provided in the following order:
1. “Menu Structure Overview” on page 54
2. “Menu Operations” on page 55
3. “View/Change Configuration Settings” on page 57
4. “View/Change TCP/IP Settings” on page 70
5. “Drive Operations Menu” on page 75 .