Sun Microsystems StorageTek T10000, Руководство оператора

Страница: 79 / 120

Drive Operations Menu
96174 • Revision EA Chapter 4 Menu System 77
Make Data Tape Submenu
MakeDataTp Make Data Tape, reformats cartridges
so they can be reused as normal “data
tapes”. This is sometimes referred to as
“reclaiming.”
A cartridge, if present, unloads when
this function is activated.
Information in the MIR about old data
files on a tape being reformatted is
erased.
VolSafe data cartridges cannot be
reformatted. If inserted, the drive
rejects a VolSafe cartridge.
If Make Data Tape Fails, and
CHK xxxx appears, try a different data
cartridge.
1. Do one of the following:
■
Press
Menu
to bypass
■
Press Select to activate.
2. When Ld Data Tp appears, insert a write-
enabled data cartridge.
3. When the reformatted data tape unloads,
remove the data cartridge.
4. Insert another write-enabled data cartridge, or
press Menu to exit the reclaim tape submenu.
Build Media Information Region Submenu
Build MIR T10000 tape drives use information
recorded at the beginning of tape of a
data cartridge, in an area known as the
Media Information Region (MIR), to
access and manage data files while the
data cartridge is loaded in the drive.
Make sure drive is unloaded before
you activate Build MIR.
Rebuild MIR flashes on the operator
panel while the MIR is rebuilding.
1. Do one of the following:
■
Press Menu to bypass
■
Press
Select
to activate.
2. When Ld Cust Tp appears, insert the write-
enabled data cartridge with an invalid MIR.
Note : When the MIR is rebuilt, the data
cartridge unloads.
3. Remove the data cartridge.
4. Insert another write-enabled data cartridge
requiring a MIR rebuild; or, press Menu to exit
the build MIR submenu.
Exit Drive Submenu
Exit Drv ? This submenu allows you to repeat the
drive operations... submenus, or exit
Drive Operations. Press Menu (No) to loop back to the Code
Update Submenu
Press
Select (Yes) to exit Drive Operations and
advance to the Firmware Release menu.
Firmware Release Level Menu
Rx.yy.zzza
This submenu displays
current drive
firmware release level
.
Press Menu or Select and advance to the Exit
menu.
Exit Menu
Exit Menu? This menu allows you to stay in the
menu system to return the drive to
Online, or to exit the menu system. Press Menu (No) to go to the Online/Offline
menu
Press
Select (Yes) to exit the menu system.
Note : If you exit the menu system with the drive offline, the display flashes
Offline
every few seconds as a
reminder that drive is still Offline (if a data cartridge has been loaded at least once).
TABLE 4-4
Drive Operations (Continued)
Options Notes Procedure