Sun Microsystems StorageTek T10000, Руководство оператора

Страница: 42 / 120

IPL the Drive (Operator Panel)
40 T10000 Operator’s Guide • July 2008 Revision EA • 96174
IPL the Drive (Operator Panel)
To reset a rack mount drive that is already powered on:
1. Make sure there is not a job or application running on the host that is using this tape
drive. If there is, stop that job or application.
2. Make sure a data cartridge is NOT LOADED.
3. Press the operator panel IPL button.
(see
FIGURE 2-2 on page 34
)
Once the IPL starts, the following things happen:
■
The drive power indicator flashes
■
The operator panel display window displays various messages relative to the IPL
sequence. These messages require no action on your part
When the drive successfully completes an IPL:
■
The drive power indicator is steady
■
An asterisk (*) appears in the operator panel display window
Note –
If there is a dump present, the operator panel display window alternates
between the asterisk and the dump message. The dump present indication will stop
when a tape cartridge is loaded.
IPL the Drive (VOP)
This process assumes you are viewing the VOP screen (see
FIGURE 1-3 on page 26
).
1. Make sure there is not a job or application running on the host that is using this tape
drive. If there is, stop that job or application.
2. Make sure a data cartridge is NOT LOADED.
3. Click the Online button, if the drive is not offline, to set it offline.
The Online button is now grey, indicating that the drive is offline. This can also be done
from the File drop-down menu. Select Drive Operations > Set Offline.
4. Select Drive Operations > IPL to start the IPL process.