Sun Microsystems StorageTek T10000, Руководство оператора

Страница: 28 / 120

Interface with the Tape Drive
26 T10000 Operator’s Guide • July 2008 Revision EA • 96174
Interface with the Tape Drive
The T10000 tape drive does not have a built-in physical operator panel; therefore, your
communication with library-attached drives is normally through the Virtual Operator
Panel (VOP) application (see
FIGURE 1-3
).
The T10000 rack mount configuration drive tray chassis has a physical operator panel
mounted on the chassis front panel (see
FIGURE 2-2 on page 34
).
Service representatives can also connect to the T10000 drive through the PC-based
StorageTek Diagnostic System (STDS) application, which has an operator panel
emulation tool.
Virtual Operator Panel
The VOP application window (
FIGURE 1-3
) provides a graphical user interface (GUI) to
the connected drive. For more information regarding VOP, and guidelines for
operation, see the
Virtual Operator’s Panel Customer User’s Guide (PN 96179).
FIGURE 1-3
VOP Application Window
1. Menu bar
2. Drive IP/name
3. Primary drive message window
4. Secondary drive message window
5. VOP text message pane
6. Drive status indicators