Sun Microsystems StorageTek T10000 Скачать руководство пользователя

Страница: 68 / 120

View/Change Configuration Settings

T10000 Operator’s Guide • July 2008

Revision EA

• 96174

Standard Label Overwrite Protection Submenu

SL Prot Y

SL Prot N

Defaults to last saved selection.
Selects standard label overwrite protection.

Deselects standard label overwrite
protection.

Do one of the following:

■

Press

Menu

to bypass

■

Press

Select

to toggle; then, press

Menu

to set, and advance to the next

submenu.

Notes

1.Manufacturing ships drives with

SL Prot N

selected.

2.Only select “

SL Prot Y

” if label overwrite code is loaded, or if running standard labels and wish the

drive to display a fatal error (CHK 33EX) when writing a non-80-byte record for VOLSER or HDR1.

3.Customers using NL or NSL tape processing cannot use SL Prot.
4.POST WRCART cannot be ran with this feature enabled.
5.Call Nearline Technical Support (NLTS) for any assistance.

Language Selection Submenu

Language ?

Defaults to last saved selection.
Selects display language:

English

Espanol

Francais

Italiano

, or

Deutsch

In the online (View) mode, only the active
language appears.

Do one of the following:

■

Press

Menu

to bypass

■

Press

Select

until desired option

appears; then, press

Menu

to set, and

advance to the next submenu.

Note

: Manufacturing ships drives with the

English

option

selected.

Tape Bar Submenu

Tape Bar Y

Tape Bar N

Defaults to last saved selection.

Enables secondary display of current
read/write point, relative to the beginning
of data mark on the tape.
Disables the option.

Do one of the following:

■

Press

Menu

to bypass

■

Press

Select

to toggle; then, press

Menu

to set, and advance to the next

submenu.

Note

: Manufacturing ships drives with the

Tape Bar N

option

selected.

Library Address Submenu

Lib Adr xy

Defaults to last saved selection.
For SL8500, and L180/L700/L1400 libraries,
the T10000 tape drives stay at the factory
preset (

In 9310 libraries, looking at the back of the
drives, the address sequence in the drive
cabinet is:

■

Left column from top:

through

■

Right column from top:

through

1. Do one of the following:

■

Press

Menu

to bypass

■

Press

Select

to start the

change mode:

2. Press

Select

to increment the

digit

until desired value appears, then press

Menu

to set.

3. Repeat step 1 for the

digit.

4. Press

Menu

to advance to the next

submenu; or, press

Select

to restart the

change mode.

Note

: Manufacturing ships drives with

Lib Adr FF

selected.

TABLE 4-1

Drive Configuration Settings (Continued)

Options

Notes

Procedure

Содержание StorageTek T10000

























































































































Результаты поиска

Содержание StorageTek T10000

Отзывы:

Похожие инструкции для StorageTek T10000

Бренды по названию

Популярные бренды

Sun Microsystems StorageTek T10000, Руководство оператора

Результаты поиска

Содержание StorageTek T10000

Отзывы:

Похожие инструкции для StorageTek T10000

Бренды по названию

Популярные бренды