Sun Microsystems Netra CT 820, Руководство по обслуживанию

Страница: 120 / 132

B-2 Netra CT 820 Server Service Manual • July 2004
B.1 Using an ASCII Terminal
1. Get the appropriate cable(s) and adapter(s) and make the necessary connections.
Use the information in
TABLE B-1
to make the necessary connections.
2. Access the Set Up menu of the ASCII terminal and bring up the Serial
Communications section.
3. Set up the serial port communications parameters.
The default settings should match the values reported on the host serial port.
■
Hardwired modem connection
■
No parity
■
9600 baud
■
1 stop bit
■
8 bit data
4. Test the connection.
Verify that communication has been established to the server and the
keyboard/display of the ASCII terminal.
TABLE B-1
Connecting an ASCII Terminal
CONSOLE Port on Netra
CT 820 Server Board
Adapter Cable Adapter
Serial Port
on Terminal
RJ-45 on the
distributed
management card RJ-45-to-DB-9
male DB-9 female-to-DB-25
male straight-through DB-25 female-to-DB-25
female gender changer DB-25 male
DB-9 male on the
rear transition card Not needed DB-9 female-to-DB-25
male straight-through DB-25 female-to-DB-25
female gender changer DB-25 male