Sun Microsystems Netra CP3060, Руководство пользователя

Страница: 63 / 129

4-6 Netra CP3060 Board User’s Guide • April 2009
■ show-devs
For a complete list of OpenBoot commands and more information about the
OpenBoot firmware, refer to the
OpenBoot 4.x Command Reference Manual. An online
version of the manual is included with the OpenBoot Collection AnswerBook that
ships with Solaris software.
4.3.3.1
probe-ide
Command
The
probe-ide
command communicates with all Integrated Drive Electronics (IDE)
devices connected to the IDE bus. This is the internal system bus for media devices
such as the DVD drive.
Caution – If you used the
halt
command or the Stop-A key sequence to reach the
ok
prompt, issuing the
probe-ide
command can hang the system.
CODE EXAMPLE 4-2
shows sample output from the
probe-ide
command.
4.3.3.2
show-devs
Command
The
show-devs
command lists the hardware device paths for each device in the
firmware device tree.
CODE EXAMPLE 4-2
shows some sample output.
CODE EXAMPLE 4-1
probe-ide
Command Output
{0} ok probe-ide
Device 0 ( Primary Master )
ATA Model: FUJITSU MHV2040BH
Device 1 ( Primary Slave )
ATA Model:
Device 2 ( Secondary Master )
Not Present
Device 3 ( Secondary Slave )
Not Present
CODE EXAMPLE 4-2
show-devs
Command Output
{o} ok show-devs
/pci@7c0
/pci@780
/cpu@17