Sun Microsystems Netra CP3060, Руководство пользователя

Страница: 20 / 129

1-6 Netra CP3060 Board User’s Guide • April 2009
TABLE 1-1
lists features of the blade server.
TABLE 1-1
Feature Summary for the Sun Netra CP3060 Blade Server
Feature Description
CPU • One UltraSPARC T1 processor (4, 6, or 8 core)
• CPU core speed: 1.0 GHz
Memory • Eight DDR-2 240-pin Very Low Profile (VLP) DIMMs, buffered,
registered
• 1-Gbyte or 2-Gbyte DIMMs, for a total memory of 16 Gbytes
• ECC supported
Power
requirement ATCA 3.0 standard of 200 watts maximum
PICMG
compliance • PICMG 3.0 R1.0
• PICMG 3.1 R1.0
Node board
support Functions as a CPU node board with the Solaris software package
Operating
system Solaris 10 6/06 OS and subsequent compatible versions with supported
Netra patches
Internal I/O
(connections to
ATCA
midplane) • Dual gigabit Ethernet for Base interface
• Dual SERDES interface as Extended interface
• Dual IPMI channel connects to the midplane for communicating with
the Shelf Management card
External I/O • Two 10/100/1000 BASE-T Ethernet ports on front panel
• One asynchronous serial port for maintenance on front panel
• One AMC slot with front panel access for AMC I/O
• Rear access support using Sun Netra CP3060 RTM:
– One 10/100 Mbps Ethernet port
– One asynchronous serial port. Access is available in front and rear
when RTM is present. Note: Either serial port can be used; but only
one of the serial ports can be used at a time.
AMC I/O Provision for adding an independent hardware vendor (IHV)-supplied
AMC disk or PCI-E card on front panel
IPMI system
management Uses IPMI communications with baseboard management controller
(BMC); performs advanced system monitoring (ASM) on local board
interface (for example, temperature sense, FRU ID, and control)
Hot-swap
support • Basic, full, and high-availability (HA) hot-swap support for node board
• AMC disk/card hot-swap support