Sun Microsystems Netra CP3060, Руководство пользователя

Страница: 17 / 129

Chapter 1 Introduction to the Sun Netra CP3060 Blade Server 1-3
■
200 MHz DIMMs, buffered and registered with error-correcting code (ECC)
■
Up to 16 Gbytes of DIMM memory with 2-Gbyte DIMMs
■
JBus-to-PCI-E application-specific integrated circuits (ASICs) to bridge processors
and the PCI-E I/O subsystem
■
Two on-board 1000BASE-T Ethernet interfaces used as ATCA Base Interface
■
Two on-board 1000 SERDES Ethernet interfaces used as ATCA Extended Interface
■
One AMC slot for x8 PCI-E I/O expansion or compatible disk drive
■
Compliant with PCIMG AMC.0/.1/.3 specifications
■
Two 3-Gbps Serial Advanced Technology Attachment (SATA) ports routed to
AMC connector
■
Two 10/100/1000 BASE-T Ethernet RJ-45 ports on front panel
■
One asynchronous serial port on front panel
■
Compact Flash socket to support an 8-Gbyte user flash type I/II memory card
■
System management support using Pigeon Point Systems Intelligent Platform
Management (IPM) controller, providing a redundant IPMI channel to
communicate with the ATCA shelf manager
■
Rear I/O access using a compatible Sun Netra CP3060 rear transition module
(RTM)
■
Maximum power consumption: 200 watts (including Sun Netra CP3060 RTM)
FIGURE 1-1
and
FIGURE 1-2
show the Sun Netra CP3060 blade server.