Sun Microsystems Netra 440, Руководство по обслуживанию

Страница: 49 / 166

Chapter 2 Preparing to Service the System 31
4. Loosen the Phillips No. 2 captive lockdown screw securing the top cover to the
chassis.
The lockdown screw is located on the chassis face above the hard drives, between
the two latches (
FIGURE 2-3
).
FIGURE 2-3
Locating the Latches on the Top Cover
5. Pull the latches up to release the top cover from the chassis, then lift the cover up
and off the chassis (
FIGURE 2-3
).
Installing the Top Cover
1. Insert the back edge of the top cover under the lip on the back panel.
2. Grasp the latches and lower the top cover onto the chassis (
FIGURE 2-3
).
3. Release the latches when the top cover is seated on the chassis.
4. Tighten the Phillips No. 2 captive lockdown screw that secures the top cover to
the chassis.
The lockdown screw is located on the chassis face above the hard drives.
Top cover latches
Captive lockdown screw