Sun Microsystems Fire X4800, Руководство по установке

Страница: 66 / 142

Attach the adapter brackets to the front posts.
Place the adapter brackets so that the bottom of the adapter bracket is aligned with the bottom
of the (5RU) space where the server will go, and that the arrow labelled “top” points up.
Use three M6 x 12 or 10-32 x 10 screws for each side. Pass the screws from the inside of the rack,
through the adapter bracket, and into the threads on the post.
Note –
The accessory box includes a printed template that you can use to help align the adapter
brackets.
Attach the adapter brackets to the rear posts.
Place the adapter brackets so that the bottom of the adapter bracket is aligned with the bottom
of the (5RU) space where the server will go, and that the arrow labelled “top” points up.
Pass two screws (1) from the inside of the rack, through the top and bottom holes in the adapter
bracket (2), and thread them into the post (3).
Note –
Do not use the center screw in the adapter bracket. It is reserved for the optional shipping
bracket kit described in “Installing and Removing the Universal Rack Mounting Kit Shipping
Brackets” on page 76 .
■
For M6 racks, use two M6 x 12 screws per side.
■
For 10-32 racks, use two 10-32 shoulder screws per side.
3
4
Installing the Server in a Rack Using the Universal Rack Mounting Kit
Sun Fire X4800 Server Installation Guide • —12, March 2011 66