Sun Microsystems Fire X4800, Руководство по установке

Страница: 116 / 142

■
8N1: eight data bits, no parity, one stop bit
■
9600 baud
■
Disable hardware flow control (CTS/RTS)
■
Disable software flow control (XON/XOFF)
Connect a serial cable from the SP SERIAL MGT port to a terminal device.
See “Attaching Administration (SP) Cables” on page 91 for the location of the SERIAL MGT
port.
Press Enter on the terminal device to establish a connection between that terminal device and
the ILOM SP.
The SP displays a login prompt. For example:
SUNSP
0003BA84D777
login:
Log in to the ILOM.
a. Type the default user name:
root
.
b. Type the default password:
changeme
.
Once you have successfully logged in, the SP displays its default command prompt:
->
You can now run CLI commands to configure ILOM for the server’s user accounts, network
settings, access lists, alerts, and so on. For detailed instructions on CLI commands, see the
Sun Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide.
▼
How to Connect to the ILOM CLI Using SSH
■
Perform the hardware setup as described in the hardware setup documentation.
■
Apply standby power to the server by connecting AC power to the system power supply. See
“How to Apply Standby Power for Initial Service Processor Configuration” on page 97 .
Using a client system, access a command line and establish a Secure Shell (SSH) connection to
the SP’s IP address with the following command:
ssh -l root
sp_ip_address
Log in to the ILOM.
The default user name is
root
and the default password is
changeme
.
▼
How to Connect to the ILOM Web Interface
■
Perform the hardware setup as described in the hardware setup documentation.
2
3
4
Before You Begin
1
2
Before You Begin
Connecting to the ILOM
Sun Fire X4800 Server Installation Guide • —12, March 2011 116