Sun Microsystems Fire X4800, Руководство по установке

Страница: 31 / 142

Caution –
All CPU modules and PCIe EM modules must be returned to their original locations.
Failure to do so can result in system failure.
▼
How to Install the Rack Mounting Hardware in Standard Rack
The rack mounting hardware consists of front and rear adapter brackets with cage nuts, screws,
and shelf rails.
Caution –
The server weighs about 180 pounds (100 kg) when fully loaded with components. To
reduce the risk of serious personal injury or equipment damage, use a mechanical lift to install
the server into the rack. If a lift is not available, remove components as described in
“How to
Remove Components to Reduce Weight” on page 26 . This reduces the weight of the server to 80
pounds (45 kg).
Always load equipment into a rack from the bottom up so that it does not become top-heavy
and tip over. Deploy your rack’s anti-tilt bar to prevent the rack from tipping during equipment
installation.
Verify that you have a 5RU space in your rack.
Select the two front adapter brackets that match your rack.
See the following figure.
The server ships with two sets of front adapter brackets: one (1) for racks with square holes and
one (2) for racks with round holes. Select the adapter brackets that match your rack.
Attach the front adapter brackets to the rack.
Make sure you orient the adapter brackets correctly, with the arrow pointing up.
Select the screws that match your rack.
■
Use one M6 per side for a square-hole rack.
■
Use three M6 or three 10-32 per side for a threaded round-hole rack.
1
2
3
Installing the Server In a Rack Using the Standard Rack Mounting Kit
31