Sun Microsystems Fire X4800, Руководство по установке

Страница: 127 / 142

It is possible that the device you added has been assigned option ROM and/or I/O space at the
expense of some other device. If this is the case, the device you added does not appear in the list
but the original device does. This depends on the position of each device in the probe order.
Decide whether you need to configure option ROM or I/O space allocation, for one of the
following reasons.
■
Error messages inform you that a device that you wish boot from has not been allocated
option ROM and/or I/O space.
■
You wish to be able to run a configuration utility such as the LSI RAID utility on a device
that has not been allocated option ROM.
■
(Optional) You wish to make the error messages go away.
Note –
There is no need to configure option ROM or I/O space allocation simply because of
these messages, unless you require the functionality provided by the option ROM and the
I/O space.
“How to Configure I/O Space Allocation” on page 127
▼
How to Configure I/O Space Allocation
Identify the devices on which you need to configure option ROM and/or I/O space allocation.
See
“How to Determine Whether You Need to Allocate Option ROM and I/O Space” on
page 126
.
Start the BIOS.
a. Power on the system.
b. To enter the BIOS setup menu, when the POST appears, press:
■
F2 if you’re connected through a Java console.
■
Control E if you’re connected through a serial console.
The BIOS setup menu appears.
■
Use the arrow and tab keys to navigate through the BIOS setup utility.
■
Use the Enter key to make selections.
■
When you are done, press F10, or navigate to the Exit menu screen to exit and save your
changes.
3
See Also
Before You Begin
1
Option ROM and I/O Space Allocation
127