Sun Microsystems Fire X4800, Руководство по установке

Страница: 46 / 142

Tools, Equipment, and Staffing Required Notes
Two trained staff Two people are needed to install the server and operate the lift.
No. 2 10-inch Phillips screwdriver
(magnetic tip recommended)
Mechanical lift Strongly recommended. If not available, reduce the weight of the
server. See
“How to Remove Components to Reduce Weight” on
page 26 .
Compatible rack See “Compatible Racks ” on page 46 .
Rack mounting kit See “Installing the Server in a Rack Using the Universal Rack
Mounting Kit” on page 49 .
Shipping brackets See “Installing and Removing the Universal Rack Mounting Kit
Shipping Brackets” on page 76 .
■ You must remove the shipping brackets if your server was shipped
in a rack.
■
You must install the shipping brackets if you plan to ship your
server in a rack.
Installing Optional Equipment
For information about how to install options such as DIMMs, PCIe EMs, and NEMs, power
supplies, and CPU modules, refer to the
Sun Fire X4800 Server Service Manual .
For information about issues and known workarounds, refer to the Sun Fire X4800 Server
Product Notes .
Compatible Racks
The rack mounting hardware is compatible with a wide range of equipment racks that meet the
following standards:
■
Four-post rack (mounting at both front and rear).
Note –
Two-post racks are not compatible.
■
Rack must have 5RU space available.
■
Rack should have a horizontal opening and unit vertical pitch conforming to ANSI/EIA
310-D-1992 or IEC 60927 standards.
■
Distance between front and rear mounting planes between approximately 26 and 34.5
inches (660.4 mm and 876.3 mm).
Installing Optional Equipment
Sun Fire X4800 Server Installation Guide • —12, March 2011 46