Sun Microsystems Fire 880, Руководство пользователя

Страница: 44 / 236

26 Sun Fire 880 Server Owner’s Guide • August 2001
Insert the female end of the power cord through the releasable tie-wrap loop located
to the right of the supply. Tighten the tie-wrap to secure the connection.
3. Install any optional components shipped with your system.
Many of the options that you ordered with your system are pre-installed at the
factory. However, if you ordered options that are not factory-installed, see the
following sections for installation instructions:
■
“How to Install a Disk Drive” on page 33
■
“How to Install a Power Supply” on page 39
Note – All internal options (except disk drives and power supplies) must be
installed only by qualified service personnel. Installation procedures for these
components are covered in the
Sun Fire 880 Server Service Manual , which is included
on the Sun Fire 880 Documentation CD .