Sun Microsystems Fire 880, Руководство пользователя

Страница: 151 / 236

Chapter 6 Configuring System Firmware 133
Note – Manually deconfiguring a single CPU causes the entire CPU/Memory board
to be deconfigured, including both CPUs and all memory residing on the board.
You can determine full physical device paths by typing:
The
show-devs
command lists the system devices and displays the full path name
of each device. An example of a path name for a Fast Ethernet PCI card is shown
below:
You can display a list of current device aliases by typing:
You can also create your own device alias for a physical device by typing:
where alias_name is the alias that you want to assign, and physical_device_path is the
full physical device path for the device.
Note –
If you manually deconfigure a device alias using
asr-disable
, and then
assign a different alias to the device, the device will remain deconfigured even
though the device alias has changed.
2. To cause the parameter change to take effect, type:
The system permanently stores the parameter change.
Note – To store parameter changes, you can also power cycle the system using the
front panel Power button.
ok show-devs
/pci@8,700000/pci@2/SUNW,hme@0,1
ok devalias
ok devalias
alias_name physical_device_path
ok reset-all