Sun Microsystems Fire 880, Руководство пользователя

Страница: 78 / 236

60 Sun Fire 880 Server Owner’s Guide • August 2001
How to Restore the Local System
Console
Perform this procedure if your system is configured to use RSC as the system
console and you need to redirect the system console to a local graphics console,
alphanumeric terminal, or an established
tip
connection. For more information
about RSC, see “About the Remote System Control Card” on page 71 and “About
Sun Remote System Control Software” on page 150.
Before You Begin
This procedure assumes that you are familiar with the OpenBoot firmware and that
you know how to enter the OpenBoot environment. For more information about the
OpenBoot firmware, see the
OpenBoot 4.x Command Reference Manual . An online
version of the manual is included with the OpenBoot Collection AnswerBook that ships
with Solaris software.
What to Do
1. Type the following commands at the system
ok
prompt:
2. To cause the changes to take effect, power cycle the system, or type:
The system permanently stores the parameter changes and boots automatically if the
OpenBoot variable
auto-boot?
is set to
true
(its default value).
What Next
You can now issue commands and view system messages on the local console.
ok diag-console ttya
ok setenv input-device keyboard
ok setenv output-device screen
ok reset-all