Sun Microsystems Fire 880, Руководство пользователя

Страница: 118 / 236

100 Sun Fire 880 Server Owner’s Guide • August 2001
Configuration Rules
■
The Sun Fire 880 server supports Sun FC-AL host adapter cards that incorporate
the Qlogic ISP2200 series intelligent Fibre Channel processor. Sun host adapter
cards that use the Qlogic ISP2100 series processor are not supported. For a list of
supported cards, contact your authorized Sun sales representative.
■
If your system is configured with a Sun StorEdge PCI Dual Fibre Channel Host
Adapter card, and its internal port is connected to the Loop B port of the FC-AL
disk backplane,
you must not use the card’s external Port 1 . Connecting Port 1 to
external devices under these circumstances is considered an unsupported
configuration. In this case, use only Port 2 to connect to external devices.
■
Do not use the internal port of the Sun StorEdge PCI Dual Fibre Channel Host
Adapter card to connect to the Loop A port of the FC-AL disk backplane. You
must connect the card’s internal port to Loop B only.
■
For best performance, install 66-MHz FC-AL host adapter cards in a 66-MHz PCI
slot (slot 7 or 8, if available). See “About PCI Cards and Buses” on page 68.
Note – All internal options (except disk drives and power supplies) must be
installed only by qualified service personnel. For information about installing or
removing a PCI FC-AL host adapter card, see the
Sun Fire 880 Server Service Manual ,
which is included on the Sun Fire 880 Documentation CD .
Sun StorEdge PCI Dual Fibre Channel Host Adapter Card