Sun Microsystems Fire 880, Руководство пользователя

Страница: 155 / 236

Chapter 6 Configuring System Firmware 137
In this example, the
.asr
output shows that the following devices have been
deconfigured:
■
All four memory banks controlled by CPU 1
■
The disk drive installed in disk slot 4
Note – The
.asr
command only shows devices that have been manually disabled
using the
asr-disable
command. It does not show devices that have been
automatically deconfigured as a result of failing firmware diagnostics. To see which
devices, if any, have failed POST diagnostics, use the
.post
command, as described
in the Sun Fire 880 Server Service Manual .
For more information, see:
■
“About Automatic System Recovery” on page 126
■
“How to Enable ASR” on page 130
■
“How to Disable ASR” on page 131
■
“How to Deconfigure a Device Manually” on page 132
■
“How to Reconfigure a Device Manually” on page 134