Sumitomo TYPE-71c, Руководство по эксплуатации

Страница: 93 / 94

6-5
*1 The applicable fiber protection sleeves vary depending on the cleave length.
60mm fiber protection sleeves ••••• Cleave length 5-16mm
40mm fiber protection sleeves ••••• Cleave length 5-10mm
*2 The protrusion part is not included.
*3 With Sumitomo identical fiber (in room temperature. Varies depending on the condition of fiber.)
*4 With the AC adapter in room temperature (20°C). If the battery pack is used, the heating time
varies depending on the temperature and the remaining battery capacity.
With Sumitomo protection sleeve FPS-40 or FPS-1. Coating diameter 250 μ m.
*5 With a new battery pack, 1 splice cycle time ( protection) completes in 90 seconds, in room
temperature. Splice & heat cycles may vary depending on the operating environment.
*6 Performed on the fiber stage after splicing.
*7 Non-condensing
*8
The Battery pack storage temperature range: -20°C ~ +50°C (if stored for less than 1 month),
-20°C ~ +40°C (if stored for less than 3 months), -20°C ~ +20°C (if stored for less than 1 year).
*9 Water resistance: Operates normally after being exposed to water dripping at 3mm/min, for at least
2.5 min on each of 4 surfaces tilted at 15°. The test is held with the battery operation, carried out by
Sumitomo, but does not guarantee that the product is free of faults or damage.
Dust resistance: Operates normally after 8 hours in a dust chamber containing dust of particle size
75
μ m or below. The test is held with the battery operation, carried out by Sumitomo, but does not
guarantee that the product is free of faults or damage.
*10 The machine spliced the fiber successfully after dropped from 76cm height on 5 faces (excluding
top face) at free-fall. The test is held with the battery operation, carried out by Sumitomo, but does
not guarantee that the product is free of faults or damage.
*11 Electrode life is not guaranteed. This number may vary depending on the operating environment.