Sumitomo TYPE-71c, Руководство по эксплуатации

Страница: 3 / 94

3. Do not use and store the splicer out of the locations defined in a brochure and this
manual. Doing so can cause splicer malfunction or deterioration, resulting in fire or
electric shock.
4. To reduce the risk of fire, electric shock or malfunction, do not allow the splicer to be
exposed to rain and get liquid such as water or a metallic object inside the splicer.
Doing so can cause fire, electric shock or malfunction by shorting out internal
components.
5. Never use the battery pack, AC adapter and battery charger, and power cables for
the machines other than the specified splicer. Doing so can cause these items to
damage, resulting in fire or heat generation.
6. Do not make mechanical or electrical modifications to the splicer since this may
expose you to dangerous voltage or other hazards.
7. Do not touch the electrodes during and after arc discharge. Doing so can cause
personal injury or electric shock.
8. The heating plate of the heat shrink oven may be hot during heating. Do not touch
the protection sleeve directly after heating. Doing so can cause burn. A protection
sleeve may also be hot after heating. Handle with care.
9. Do not operate the splicer in the rain. Doing so can cause AC adapter or battery pack
to be short-circuited.
10. Do not expose the splicer to extremely high temperature and high humidity or to
direct sunlight for prolonged periods.
11. Do not continuously use the heat shrink oven for long hours, keeping it high
temperature. Doing so can cause heat shrink oven to malfunction.
The following case is the exception for repairing and replacing the product free of
charge:
The Heating duration is set to a long time (e.g. 180 sec.) and the Finish temperature
is set to a high temperature (e.g. 200 °C). The heat shrink oven is used for long hours
by continuing to press the Heat key shortly after the heat cycle is completed.
12. Only use alcohol to clean the splicer. To prevent malfunction and damage, do not use
any other kind of chemicals.
13. Never use spray cleaners such as Freon or flammable gas on the splicer. Heat by arc
can cause chemical reactions to occur to gas component, which will deteriorate a
microscope lens, resulting in a loss of splicing capability.
14. Parts that compose the heat shrink ovens might become high temperatures. When
those parts are damaged, do not use it and contact our service center.
15. Because it is likely to injure by shards of glass when the monitor is damaged, do not
use it and contact our service center.
16. When parts that compose this product and the accessory (battery pack, AC adapter,
and power cord, etc.) are damaged, do not use it and contact our service center.
17. Do not use this product near the electronic equipment that handles a highly accurate
control and the faint signal such as the heart pacer. The influence of the
miss-operation of electronic equipment might be given.