manualshive.com logo in svg

Sumitomo TYPE-71c, Руководство по эксплуатации

Поделиться
Скачать
Sumitomo TYPE-71c Скачать руководство пользователя страница 2

 

This product has been designed and manufactured to assure personal 
safety. Improper use can result in fire, electric shock or injury to persons. 
Please read and observe all warnings instructions given in this operation 
manual. 
Use your splicer only for its intended purpose. 

 The meaning of these symbols   

In the product and this operation manual, symbols are used to highlight warnings and cautions for 
you to read so that accidents can be prevented. The meanings of these symbols are as follows:   

Symbol used in the product 

 

This symbol, where it appears on the unit, indicates that hazardous voltage 
is present inside of the splicer. 

The meaning of these symbols 

 

This symbol indicates a warning, caution, or danger and alerts you important 
instructions have been included on the product or in the manual. 

 

This symbol indicates actions that are prohibited. 

 

This symbol indicates actions that must be taken. 

The meaning of Warning and Caution 

 

This symbol indicates explanations about extremely dangerous matters. If 
users ignore this symbol and handle the splicer the wrong way, serious injury 
such as fire or electric shock, or death could result.

 

 

This symbol indicates explanations about dangerous matters. If users ignore 
this symbol and handle the splicer the wrong way, bodily injury and damage 
to the equipment could result. 

Caution 

Warning 

Be sure to read all the following warnings and cautions before use. 

[Warning]

<Setting up and using splicer> 

 

1. This fusion splicer performs an arc discharge. Do not use the splicer in a hazardous 

location in which inflammable gas can generate or only electrical apparatus for 
explosive gas atmosphere can be used. 

2. Never use spray cleaners such as Freon or Flammable gas on the splicer. 

Decomposition of arc by heat will cause toxic gas, or abnormal arc may result in 
damage or fire. 

Содержание TYPE-71c































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды