manualshive.com logo in svg

Sumitomo TYPE-71c, Руководство по эксплуатации

Поделиться
Скачать
Sumitomo TYPE-71c Скачать руководство пользователя страница 62

3-8 

 

Packing and storage instructions

• Store the TYPE-71C and its accessories in a designated place in the case referring to 

the photo below. 

• Store the TYPE-71C in the direction shown in the photo below. 
• The TYPE-71C with a cooling tray cannot be stored in the case. Remove the cooling 

tray from the splicer and store it in the pocket.

 

The TYPE-71C fusion splicer is a precision instrument. Its rugged shipping case is 
custom designed to protect it from impact, dust, dirt, and moisture. Always store and 
transport the machine in its case. Observe the following instructions. 
 
• Clean the TYPE-71C and all accessories before storing them. 
• Be sure to remove the battery pack from the TYPE-71C and store it in a given place.

 

• Reposition the monitor before storing.

 

• Discard the liquid solvent properly, or lock the dispenser completely and put it in a 

plastic bag before packing the dispenser in the case.

 

Keeping the battery in the TYPE-71C may cause the battery 
terminal to be damaged or deteriorated, resulting in fire.

 

Warning 

*Sold separately 

TYPE-71C 

Operation manual 

Fiber cleaver 
(Optional*) 

Jacket remover 
(Optional*) 

Carrying case 

Cooling tray 
Spare electrodes 

Power cord 

AC adapter 

Battery pack 
 

 

Strap for 

 carrying case 

 

Содержание TYPE-71c































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды