Sumitomo TYPE-71c, Руководство по эксплуатации

Страница: 53 / 94

2-28
Splice protection
0. Open the oven lid and oven clamps. Open the hood and all lids of the fiber holders.
Make the left hand oven clamp linked with the oven lid and the right hand oven
clamp independent.
1. Take out the cable and slide the fiber protection sleeve onto the fiber. Make sure
that the protection sleeve is centered over the splice and at least 5mm of the sleeve
overlaps the cable sheath at each end of the splice.
Drop cable
Drop cable
Fiber protection sleeve
At least 5mm of the sleeve must overlap the cable sheath at each end of the splice.
Pay attention not to bend and
flex the cable. Failure to do so
can cause the splice to break.
3. While applying a slight tension to the
cable end, close the left hand oven
clamp and oven lid. Start the heat
shrink process.
4. After the heat shrink process is
complete, open the oven lid and
oven clamps and take out the
cable.
While maintaining a slight tension on the cable ends,
close the oven clamps.
2. While maintaining a slight tension on the cable ends, transfer the cable to the heat
shrink oven and close the right hand oven clamp.
Caution